The short answer
HVAC system cleaning removes dust, debris and pest material from your supply and return ducts, blower, coil and drain pan using sealed registers and a HEPA vacuum under negative pressure. It makes sense when you see heavy dust, renovation debris, pests or visible growth, not as a health treatment.
Your heating and cooling system moves the same air through your home over and over. When the ducts, blower and coil collect dust, debris or something worse, that material can blow back into your rooms or slow the system down. MetroFlow cleans forced-air HVAC systems in houses, brownstones, condos and apartments across Brooklyn and nearby neighborhoods. This page covers the signs that point to cleaning, what a cleaning includes, how our certified technicians work inside your home, what affects the price and what to expect from start to finish. If your system doesn't need cleaning, we'll tell you.
Signs you need it
Most people call us because they see or smell something. Some signs point toward cleaning. Others point to a different problem, such as a clogged filter or a failing part, and we'll tell you if that's what we find.
- Dust puffing out of supply registers when the system turns on, or dust settling quickly after you clean
- Fine renovation dust from drywall, plaster or floor sanding, especially if the system ran during the work
- Debris, nesting material, droppings or signs of insects or rodents in the ducts or at the registers
- A musty smell when the heat or air conditioning runs, or a burnt-dust smell that lingers well past the first days of heating
- Weak airflow from some registers while others blow normally
- Visible growth on the coil, in the drain pan or around register openings

What's included
A full system cleaning covers the parts air actually travels through, not just the duct openings you can see from the room.
Sanitizing is not part of the standard visit. We apply a product only when there's a reason, such as a lingering odor, pest contamination or visible growth, and we only use products registered for that use. We'll explain what the product is and where it goes before we apply anything.
- Inspection of supply and return ducts, with a camera in runs we can't see into directly
- Cleaning of every accessible supply and return duct run
- Removal, washing and reinstallation of register covers and return grilles
- Cleaning of the supply and return plenums
- Cleaning of the blower compartment and blower wheel where they can be safely reached
- Surface cleaning of the accessible evaporator coil and condensate drain pan
- A new filter, either one you provide or one sized for your system
- Before-and-after photos and a short written note on anything we found
How we work inside your home or apartment
Brooklyn homes range from detached houses with an air handler in the basement to apartments with a unit tucked into a closet or above a hallway ceiling. The method stays the same; the setup changes to fit the space.
We lay drop cloths along our path and around the work area. Before cleaning, we seal every supply register and return grille. Then we connect a HEPA-filtered vacuum to the system so the ducts are under negative pressure. That means air, and the dust in it, is pulled toward our equipment instead of out into your rooms.
With the vacuum running, we work through the ducts one opening at a time, using rotary brushes and air whips to loosen dust and debris stuck to the duct walls. Where we can't see down a run, we use a camera to check our work and look for crushed, disconnected or blocked sections. In apartments, we keep our equipment inside your unit and follow your building's rules on access and work hours.
Ready for cleaner ducts?
When cleaning makes sense
The U.S. EPA advises cleaning air ducts when there is substantial visible mold growth, vermin, or excessive dust and debris. It also says duct cleaning has not been shown to prevent health problems. That's how we approach the work: we clean ducts to remove material that shouldn't be there, not to make health promises.
The EPA also warns homeowners to research the process before responding to very cheap advertised offers, and to be careful with chemical treatments. A real system cleaning takes time and equipment. If an offer sounds like a quick pass at a few registers, ask exactly what's included.
Timing is up to you. New York City's heat season runs from October 1 through May 31, and many owners like to schedule before the heat comes on or after it shuts off for the summer. We clean year-round.
What affects the price
We quote each job once we understand the system. The main factors are:
We'll walk you through the quote before work starts. If we find something unexpected once we're inside the ducts, we'll talk to you before doing anything extra.
- The number of supply and return vents
- The total length of the duct runs and how easy they are to reach
- The condition of the system, including heavy debris, pest material or visible growth
- The building type, from a single-family house to a walk-up or an elevator building with access rules
- Whether the blower, coil or drain pan needs more than routine cleaning
How a visit works
It starts with a conversation. Tell us about your system, roughly how many vents you have and what you've noticed, and we'll set a time. If you live in an apartment or co-op, check with your building about access and work hours ahead of the visit.
When we arrive, we walk the space with you, look at the air handler and registers, and confirm the plan. Then we put down protection, seal the registers, connect the vacuum and clean the system section by section.
When we're done, we reinstall the covers, put in the new filter, run the system to check airflow and clean up our work area. You'll get photos and our notes, including anything that needs a repair we didn't do, such as a crushed or disconnected duct.
HVAC System Cleaning by city
- HVAC System Cleaning in Greenpoint
- HVAC System Cleaning in Long Island City
- HVAC System Cleaning in Hunters Point
- HVAC System Cleaning in Williamsburg
- HVAC System Cleaning in Stuyvesant Town
- HVAC System Cleaning in Sunnyside
- HVAC System Cleaning in Peter Cooper Village
- HVAC System Cleaning in East Williamsburg
- HVAC System Cleaning in Murray Hill
- HVAC System Cleaning in Kips Bay
- HVAC System Cleaning in East Village
- HVAC System Cleaning in Gramercy

