The short answer
Commercial duct cleaning removes built-up dust, debris and contamination from the supply and return ducts in shops, offices and mixed-use buildings. Our certified crew seals the registers, runs a HEPA vacuum under negative pressure, and loosens debris with rotary brushes and air whips. Before we quote a price, we look at the system and tell you whether cleaning is the right fix.
Many Brooklyn property owners live above or beside the space they rent out: a ground-floor shop under two apartments, a small office in a brownstone, or a converted storefront with its own heating and cooling system. MetroFlow cleans duct systems in these smaller commercial and mixed-use spaces, and in offices, studios and multifamily buildings in Brooklyn and nearby neighborhoods. We clean supply and return ducts, registers and the accessible parts of the air handler. We cover floors, seal vents and explain what we found, just as we would in a family's apartment.
Signs you need it
A commercial system often runs longer hours and serves more people than a home system. Dust and debris can build up unnoticed until a tenant, customer or employee mentions it. These are the signs owners usually notice first:
One sign on its own doesn't always mean the ducts need cleaning. Weak airflow can come from a clogged filter or a closed damper, and a musty smell can come from a dirty drain pan. We check for those simpler causes first and tell you if cleaning isn't the fix.
- Dust puffing out of registers when the system starts, or settling on shelves, counters and desks soon after you clean
- Fine dust that keeps appearing after a renovation, build-out or tenant fit-out
- Debris, nesting material, droppings, or signs of insects or rodents in the ducts or at the grilles
- A musty smell when the heat or air conditioning comes on, or a burnt or stale odor that doesn't clear
- Weak airflow at some registers while others blow normally
- Visible mold growth on grilles, duct surfaces or around the air handler

What's included
A standard commercial duct cleaning covers the parts of the system that move air through your space. Before we start, we walk the system with you and confirm which runs and components we can reach, so you know the scope before any work begins.
- Inspection of supply ducts, return ducts, registers and the air handler cabinet where accessible
- Camera check of duct runs we can reach, so you can see their condition before and after
- Cleaning of every reachable supply duct and branch line
- Cleaning of return ducts and return grilles
- Removal, washing and reinstallation of registers and grilles
- Cleaning of the blower compartment and accessible air handler surfaces
- Cleaning of accessible coil faces where the equipment allows it
- A fresh filter in the size your system uses, or a note if you prefer to supply your own
- Resealing of any access openings we make during the work
- A final walk-through and a short written summary of what we found and cleaned
How our crew works in your building
We start by protecting the space. The crew lays drop cloths from the entrance to each work area and covers furniture, desks, displays and merchandise near the registers. If apartments upstairs share the system, or if a hallway is in use, we keep the path clear and tidy.
Next, we seal every register and grille with plastic and tape so loosened dust stays inside the ducts. We connect a HEPA-filtered vacuum to the main trunk line. This puts the system under negative pressure, so debris is pulled toward the vacuum instead of into the room.
With the vacuum running, we work rotary brushes and air whips through each branch, from the register back toward the trunk. The brushes scrub the duct walls, and the air whips knock loose dust out of bends and corners. Where a run is long or hard to see, we use a camera to check our work before we move on.
Occupied buildings need some planning. We can work in sections so part of a shop, office or building stays usable, and we schedule around business hours and residents when we can. When we finish, we remove the seals, put the grilles back, pick up the drop cloths and vacuum the work areas.
Ready for cleaner ducts?
When duct cleaning makes sense
The U.S. Environmental Protection Agency advises cleaning air ducts when there is substantial visible mold growth, vermin, or excessive dust and debris. The EPA also says duct cleaning has not been shown to prevent health problems, so we don't sell it that way. We clean ducts to remove dust, debris and contamination you can see or smell. The EPA also warns consumers to research the process before responding to very cheap advertised offers, and to be careful with chemical treatments. We agree, and we're glad to explain every step before you book.
We don't apply sanitizers or coatings by default. We only suggest one when there's a reason, such as a lingering odor, pest contamination or visible growth. When we do, we only use products registered for that use, we apply them according to the label, and we tell you what the product is and why we suggest it first. If mold keeps coming back, the moisture source has to be found and fixed, or the growth will return.
If you own a multifamily building with ducted heat, plan around New York City's heat season, which runs from October 1 through May 31. During that period, owners must keep apartments heated to the city's minimum temperatures. We can schedule the work outside that window, or do it in sections so the heat stays on.
What affects the price
Every commercial system is different, so we price the job after we've seen it or reviewed clear photos. These are the main factors:
- The number of supply and return vents
- The length of the duct runs and how easy they are to reach, whether through finished ceilings, drop ceilings, shafts or crawl spaces
- The condition of the system: light dust, heavy debris, renovation dust, pest contamination or visible growth
- The building type and layout: storefront, office, mixed-use or multifamily, plus the number of floors and separate systems
- Scheduling needs, such as working in sections or outside business hours
How a visit works
Start by telling us about the space, the system and what you've noticed. Photos of the registers, the air handler and any problem areas help us understand the job. For larger or more complex systems, we'll arrange a site look first.
We then send a written scope that lists what we'll clean, what we can and can't reach, and anything we recommend fixing separately, such as a damaged duct or a moisture problem. Once you approve it, we set a date and time that works for you and your tenants.
On the day of the visit, the crew protects the space, seals the registers, cleans the system and puts everything back. At the end, we walk you through what we did, show you camera views where we took them, and leave a short summary for your records.

